PLC56UTX (Texas Light Bar)

56" Upgraded Power-Link light bar comes complete with the light bar, PLC-TX6 6-button Power-Link control pad, hardwire wireless transmitter, and hardware-mount base. Both the light bar and control pad for in the cab install with just two wires (12V+ and Ground) from each item. Signals are sent via the vehicles power lines in order to control the 4 flash patterns (including traffic control arrows and strobe) and the two work lights. The two brake, tail, and turn heads are controlled wirelessly with the included TowMate wireless transmitter. The same wireless transmitter can be used to operate a TowMate wireless tow light. There are now 20 LED strobe heads with each containing 4 LED's for a total of 80 high intensity flashing LED's.
Click here to view a video explaining the technology.

56" Power-Link Lightbar comes complete with light bar, PLC-TX6 6-button Power-Link control pad, and hardware mount base. Both the lightbar and control pad for in the cab install with just two wires (12V+ and Ground) from each item. Signals are sent via the vehicles power lines in order to change between the 4 flash patterns (including traffic control arrows and strobe). There are 22 heads with each containing 4 LED's for a total of 88 high intensity LED's.
Click here to view a video explaining the technology.

86" Upgraded Power-Link Lightbar comes complete with hardware-mount base and 6-button PLC-TX6, 6-button Power-Link control panel. Both the lightbar and control pad for in the cab install with just two wires (12V+ and Ground) from each item. Signals are sent via the vehicles power lines in order to control the 4 flash patterns (including traffic control arrows and strobe) and the four work lights. The four brake, tail, and turn heads are controlled wirelessly with the included TowMate wireless transmitter. The same transmitter can be used to operate a TowMate wireless tow light such as a TM48. The PLC86U incorporates 4 work lights, and 4 s/t/t lights, along with 38 flashing LED modules for an impressive 168 LED total. The PLC86U, perfect for a single light bar solution for your rotator or heavy.

23" Power-Link Lightbar comes complete with either a magnetic or hardware mount base. Both the lightbar and controller pad for in the cab install with just two wires (12V+ and Ground) from each item. Signals are sent from the include PLC-TX6, 6-button Power-Link control panel, via the vehicles power lines in order to change between the 4 flash patterns (including traffic control arrows and strobe). There are 12 heads with each containing 4 LED's for a total of 48 high intensity LED's.
Click here to view a video explaining the technology.

48" Power-Link traffic control arrow utilizes high intensity LED's to provide four distinctly illuminated patterns: left to right, right to left, center out, and random strobe. As with other Power-Link products, this item installs with just two wires from the light and control card (12V+ and Ground) with no direct connection necessary between the two. With 8 modules containing four LED's each, this unit provides optimal visibility to protect from oncoming traffic. System comes complete with the traffic arrow and PLC-TX6, 6-button Power-Link control panel.
Click here to view a video explaining the technology.

This high-intensity work light with Power-Link technology integrated into it utilizes 12 LED's (rated for 100,000 hours of use) to illuminate any recovery scene with sheer brightness. The integrated PLC-RX allows this light to install with no direct wiring to a switch and also gives it the ability to come on in conjunction with any other Power-Link light or as a strobe itself. The unit also features a fully adjustable mounting bracket providing the ability to aim it where you need it most. Made in the USA and boasting a lifetime warranty, you'll never need to buy another work light for your truck or utility vehicle again. The DF1200P is a package that also includes the PLC-TX.

This high-intensity work light with Power-Link technology integrated into it utilizes 12 LED's (rated for 100,000 hours of use) to illuminate any recovery scene with sheer brightness. The integrated PLC-RX allows this light to install with no direct wiring to a switch and also gives it the ability to come on in conjunction with any other Power-Link light or as a strobe itself. The unit also features a fully adjustable mounting bracket providing the ability to aim it where you need it most. Made in the USA and boasting a lifetime warranty, you'll never need to buy another work light for your truck or utility vehicle again.

The PLC100 Series is the perfect compliment to your Power-Link lightbar but can also be purchased separately and used in conjunction with a PLC-TX. These 15.75" strips install with two wires and mount anywhere on the truck body with two screws. There are 10 flash patterns to choose from with a simple wave of a magnet. Lifetime warranty.

In addition to the PLC100 series, the PLC50 4.5" LED modules install with two wires and mount anywhere on the truck body with two screws. When connected to power, the marker light mode can be set to active or inactive. To activate the desired flash sequence, simply engage the button linked to control it. There are 8 flash patterns to choose from with a simple wave of a magnet. The PLC50 Series is the perfect compliment to your Power-Link lightbar but can also be purchased separately and used in conjunction with a PLC-TX. Chrome ring included. Lifetime warranty.

The PLC2/PLC2.5 Series of 2" and 2.5" round marker/flasher combo LED modules can replace existing markers with no additional wiring necessary. Simply pop the old ones out and the new ones in and enjoy the safety of high-intensity flashing markers when activated. These modules can be set to come on as markers when powered (either color if a combination), or not if so desired. Controlled with the PLC light bar control or PLC-TX. Choose size and lens/LED colors below. Lifetime warranty.

In response to the increased standards for lighting on recovery vehicles in many states, TowMate has developed a solution for those areas requiring alternating lights utilizing the Power-Link technology that simplifies the installation process. The package includes (4x) 4.5" high intensity flush mount LED's, (1x) PLC-TX, and (1x) PLC-RX-QF.
Click here to view a video of this item.

The Towmate PLC-TX6, 6-channel transmitter, and the PLC-RX, 2-channel receiver, are power line communication modules. Each module is designed to communicate on automotive DC power lines. The transmitter and receiver modules are to work together as a system. One transmitter can communicate to several receiver modules on the automotive power bus. This same controller controls any and all Power-Link series lights and light bars. The power should be routed via a switched power connection.

The Towmate PLC-TX 6-channel transmitter wires in line of any existing switch panel and reduces the outputs to two wires. It is designed to work with the PLC-RX, 2-channel receiver. Each module is designed to communicate on automotive DC power lines. The transmitter and receiver modules are to work together as a system. One transmitter can communicate with up to three independent receiver modules. The 12V+ power should be routed via a switched power connection.

The Towmate PLC-TX 6 channel transmitter and the PLC-RX 2 channel receiver are power line communication modules. Each module is designed to communicate on automotive DC power lines. The transmitter and receiver modules are to work together as a system. One transmitter can communicate to several receiver modules on the automotive power bus. The receiver module has 2 outputs. The receiver outputs can be trained with a magnet to respond to any button on the PLC-TX independently or together and have the ability to provide power or a random strobe pattern upon activation. These outputs provide 12V DC @ 60Watts maximum power. To ensure reliability of data transmission, each Transmitter and Receiver module must be located on the same switched power bus.